wire to via minimal distance
Can you provide me the design rules for minimum distances and width for vias and nets.
28.10.2002 16:11:30
Thema: wire to via minimal distance
Re: wire to via minimal distance
Hi
The minimum Design Rules for PcbPool are as follows.
Minimum TrackTrack spacing 0.15mm (6mil).
Minimum PadTrack spacing 0.15mm (6mil).
Minimum PadPad spacing 0.15mm (6mil).
Minimum Drill size 0.3mm (12mil)
This is the minimum finished hole size allowed.
Minimum Annular Ring 0.3mm(12mil)
This is the diameter of the pad minus the diameter of the drill.
Soldermask Spread 0.15mm (6mil)
This is the diameter of the Soldermask pad minus the diameter of the Copper pad.
Minimum SilkScreen Aperture 0.18mm (7mil)
This is the minimum aperture width we can produce in Pcb Pool.
Thank you for your interest in Pcb Pool
The minimum Design Rules for PcbPool are as follows.
Minimum TrackTrack spacing 0.15mm (6mil).
Minimum PadTrack spacing 0.15mm (6mil).
Minimum PadPad spacing 0.15mm (6mil).
Minimum Drill size 0.3mm (12mil)
This is the minimum finished hole size allowed.
Minimum Annular Ring 0.3mm(12mil)
This is the diameter of the pad minus the diameter of the drill.
Soldermask Spread 0.15mm (6mil)
This is the diameter of the Soldermask pad minus the diameter of the Copper pad.
Minimum SilkScreen Aperture 0.18mm (7mil)
This is the minimum aperture width we can produce in Pcb Pool.
Thank you for your interest in Pcb Pool
30.10.2002 11:40:37