Forum

Hi,
We are working with PCAD and we want to make up a panel (on a 100*100 mm card put 4 card of 45*45).We would like to know how on PCAD to represent a rout on pips ?

What is V-score ?

Thanks in advance.

: Hi,
: We are working with PCAD and we want to make up a panel (on a 100*100 mm card put 4 card of 45*45).We would like to know how on PCAD to represent a rout on pips ?
:
: What is V-score ?
:
: Thanks in advance.


Hi Pierre
Unfortunatily you will have to contact Pcad support to find out how to create a panel in pcad. If you send us on the one up pcb then we can create the panel for you in our Cam software. We will step up the board 2 x 2 with 2mm between circuits and put a 10mm frame around the boards and then rout with pips. The charge for this is Euro30
V-Score is an alternative to routing. It is where the boards are cut on top and bottom with a blade. They are not cut fully through so that if you look at the side view of the panel it is like a V cut on top and a
V cut on bottom ( >< )with the boards held by the material in the middle. This allows the boards to be held together and easily broken apart after mounting the components. We do not offer this service in Pcb-Pool.
Any more questions please give our sales team a call and we will be glad to answer any more questions you may have.

Best Regard
Your Pcb-Pool Team